![]() ![]() ![]() It'll also stay at a load if you've done anything like mess with the OC Genie/automatic overclock, changed vcore in bios, tampered with bios settings on a multitude of ways like disable speed step or c-states etc. Moving the mouse is a load, so the cpu will not idle if you keep moving the mouse to keep the Screensaver disabled or the monitor active. OC will change that, as will locking the cores at max boost of 4.9GHz, both of which drastically increase power usage, and therefore heat output. For the 9700k, that's 1 core at 4.9GHz, 2 cores at 4.8GHz, 3-4 cores at 4.7GHz and 5-8 cores at 4.6GHz. It's usually pretty pathetic.Īt loads over 30% (which is basically anything you start up) the cpu goes to best performance mode and will turbo/boost according to temps and power limits. You can use the Symfony CLI to: Create new Symfony applications. Its Open-Source, works on macOS, Windows, and Linux, and you only have to install it once in your system. Open your console terminal, move into your new project directory and start the local web server as follows: 1 2 cd my-project/ symfony server:start. Idle, base, boost.Īt idle, the cpu backs off on core speeds and voltage use, so temps are set according to ambient case temps and efficiency of cooler.Īt minimal loads, under 30%, you get base speeds, which is the factory set speed to determine TDP. The Symfony CLI is a developer tool to help you build, run, and manage your Symfony applications directly from your terminal. Install PHP 8.1 or higher and these PHP extensions (which are installed and enabled by default in most PHP 8 installations): Ctype. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |